Gorilla Waterproof Patch & Seal Spray is a flexible, rubberized coating that seals out water, air and moisture. The applicator nozzle has a controlled spray pattern providing a clean, even coat. Before applying, shake well and spray 8” to 12” from surface. Be sure to allow the product to cure in between coats and before water exposure. Once completed, the self leveling formula smoothly covers small gaps and cracks ensuring a watertight seal. When dried, Gorilla Waterproof Patch & Seal Spray is paintable and temperature/UV resistant resulting in lasting repairs!

GREAT FOR: Metal, Concrete, Wood, Aluminum, Brick, Tile, Fabric, Rubber**, Glass and More!
**May not work for all types of plastics and rubbers
Not for continuous submersion or below-waterline use.

DIRECTIONS:
1) Clean surface of dirt, dust, grease and oil. Make sure surface is dried completely.
2) Shake well. Spray 8" to 12" from surface, covering evenly. A test spray on a disposable object is recommended before applying to your project.
3) Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24 hours.

TIP: To avoid possible clogging, turn can away from body towards a disposable object, turn upside down and spray a short jet of clear gas after completing job.
NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 1/4". Apply between 50F and 120F.

PAINTING: Works with both latex and oil based paints. When coating with oil based paints, use a primer first before painting